The need for repairs in a new building

Have you decided to buy an apartment in a new building? Almost always, developers offer only walls, so you need to know where to start repairs in a new building?

Initially, a work plan must be drawn up. You need to know exactly what you want to achieve. You can not start spontaneous work, detailed planning will allow you to:

• Purchase the required amount of materials.
• Order windows and doors that are necessary specifically for your apartment.
• Conduct wiring designed specifically for your convenience.
• Order plumbing that meets your wishes.
• Buy furniture that will harmoniously fit into the design of your room.

Buying a new apartment, of course, you want to move quickly. However, you will get a draft type option that will make you start repairing immediately.

back to index ↑

Features of repair in new buildings

Buying an apartment in a new building is quite attractive. You become the first owner of an apartment where no one has lived yet. However, such an acquisition poses new challenges for you:

• Developers offer only walls.
• You have to do the repair yourself.
• The problems associated with the installation of plumbing fall on your shoulders.
• You need to take care of the electrical work yourself.
• You will need to order windows and doors.

When thinking about how to start repairs in a new building, you need to remember that a new house always shrinks. Experienced specialists do not recommend starting repairs earlier than in 2-3 years.

However, the dream of owning your own home does not allow you to wait so long. Every family dreams of moving into their own apartment as soon as possible. If you intend to immediately begin work, then you should purchase special materials:

• Wallpaper with a fabric type base.
• Stretch ceilings.
• Floor covering made of natural wood.

These materials are strong enough, so they perfectly adapt to the deformation of the building. You can get a quality solution that allows you to perform work related to the decoration of the premises.

back to index ↑

Advantages of self-repair in a new building

Despite the difficulties associated with moving to a new building, you can get huge benefits from buying an apartment without finishing. This solution has its own advantages:

• You can not overpay the developer for interior work.
• It is possible to independently renovate your own apartment.
• You will be able to realize your own wishes.
• You have the opportunity to decorate the apartment in a style that suits you.

Such a solution will allow you to buy an apartment much cheaper than with interior finishing. You will be able to independently perform certain work, which will allow you not to overpay the masters.

You will need a fairly large amount of building materials, so it makes sense to first make an estimate of the required amount, and then go shopping. As a rule, all merchants offer significant discounts for bulk purchases.

It is quite convenient to order materials on the Internet. You will get the opportunity to buy the required amount of goods from manufacturers, which will allow you not to pay for the services of intermediaries. Choose a store that offers free shipping, which saves you from having to rent a vehicle.

back to index ↑

Preparatory stage

You do not know where to start repairing a new building? You should complete the preparatory work. They are considered the most time-consuming, leave a lot of dirt. Therefore, you have to complete the following tasks:

1. If necessary, the walls are demolished and partitions.

2. Transfer of partitions and walls to the required location.

3. Getting rid of the rough-type finish, which was completed by the builders.

4.Order and installation of window structures.

5. Laying pipes, allowing you to install plumbing.

6.Installation socketsas well as electrical wiring.

7. Performing floor screed.

This stage of work, as a rule, takes a lot of time. You will need to carefully study the technology of operations in order to achieve the desired result. If possible, it makes sense to turn to specialists who have extensive experience.

You can hire several teams that will deal with their specifics. This decision will allow you to quickly proceed to the next step:

• Alignment of walls with putty and plaster.

• Plastering and plastering the ceiling.

When you level these surfaces, you can proceed to the final finishing of the room. You have to stick wallpaper, panels and tiles. You can perform these procedures yourself.

After each stage of work, a lot of debris and dust remains, so timely cleaning should be done. If you allow the accumulation of garbage waste, then you will make it difficult to carry out repairs.

Experts advise very strictly follow the order of the work. It is necessary to draw up an accurate plan that will allow you to carry out repairs correctly and purposefully.

back to index ↑

How to dismantle walls in a new building?

If you are not satisfied with the layout proposed by the developers, then you will have to proceed with the demolition of walls or partitions. This procedure is not at all simple. You will have to apply to the BTI to get a special permit.

If you are planning to demolish load-bearing structures, then special knowledge will be required. This procedure is best entrusted to professionals who can correctly take into account all the nuances and ensure the safety of the operation.

You can independently dismantle interior partitions. Before starting work, you should prepare:

• If wiring has already been done in the new building, then the room should be de-energized.
• You will need special equipment designed to break the partition.

• Get ready for a lot of trash. Therefore, it is necessary to agree on the removal of construction waste.
• You will need goggles as well as a respirator.
• It is necessary to remove the plinth, as well as the existing decorative elements.

Strict dismantling procedures must be followed. If you work with a sledgehammer, then the destruction is carried out strictly in the direction from the top row to the bottom.

When demolishing the wall that separates the toilet from the bathroom, it should be noted that between them, as a rule, wooden-type reinforcement is laid. To simplify the destruction process, it makes sense to moisten the partition in advance.

The entire dismantling process requires strict adherence to safety standards. If you turn to professionals, they will do the work themselves. This solution has a relatively low cost.

Specialists use special tools, so you do not have to purchase additional equipment, protective equipment, or hire transport to remove a huge amount of garbage.

back to index ↑

Carrying out the installation of electrical wiring

Are you wondering where to start renovating a new building? One of the important tasks is the wiring. This stage should be prepared in advance. You need to calculate how many outlets you need for each room.

Take a sheet of paper on which you can draw a plan of the apartment. Prepare a list of appliances that you plan to place in each room. It makes sense to provide at least one spare outlet for each room.

It is necessary to measure the distance that you need to pull the wires. These measurements are needed in order to purchase the required amount of material. You will also need to purchase switches.

When performing installation work, you should consider the following recommendations of specialists:

It is important to provide free access to sockets and switches.

• Switches should be placed at the entrance to the room.

• If you know exactly the location of electrical appliances, then sockets should be installed specifically for them.
• Wires can only be pulled horizontally or vertically, not diagonally.

• You need to prepare a wire layout plan in advance. As you stretch, make notes in this document.
• All connections and branches, as well as the wires themselves, must be hidden in special cases.

All work related to the provision of an apartment with electricity must be carried out as correctly as possible. If you do not have experience, it is recommended to contact specialists who will independently perform the installation.

back to index ↑

Assistance of specialists in the implementation of repairs in a new building

How nice to move into an apartment that has been recently renovated. Naturally, it is quite economical to perform finishing work on your own. However, this situation has some disadvantages:

• You have to carry out independent planning, which requires certain knowledge.
• Need to buy materials. If you don’t measure accurately enough, you will have to constantly buy something.
• You need to find time to fully devote yourself to repair.
• You will need to study a large amount of information to understand the technology of the process.

Therefore, it is much easier to seek help from a specialized company. Experienced designers will help you develop a project that meets exactly your wishes. In such a firm, as a rule, there are several teams performing specific operations.

When contacting specialists, you will receive the following benefits:

• Departure of the master to the object, which will allow you to perform the correct measurements.
• Assistance to the designer in drawing up the project of your apartment.
• Assistance in the procurement and delivery of building materials.
• Professional and fast work.
• You do not have to clean up and take out the trash.
• Several teams are working at the same time, so the process goes quickly.
• You will receive a quality guarantee, which will allow you not to be afraid that after shrinkage you will have to redo everything.
• The masters have their own equipment, as well as transport.

If you do not want to completely entrust the repair to the masters, then it makes sense to hire workers to perform specific procedures. The dismantling of walls or partitions, as well as the laying of pipes and wiring deserves great attention. These operations require professional knowledge and skills.

Don't know where to start renovating a new building? Initially, you need an exact plan of what you want to get in the end result. This approach will allow you to accurately calculate the required amount of materials so that you do not have to throw out something superfluous.

back to index ↑

Video

---