Drawer systems for the kitchen

Insufficient amount of free space in the kitchen is the eternal problem of homeowners. Regardless of the amount of furniture, it will always be small. And things that are removed deep into the boxes are not so easy to get. Retractable systems for the kitchen can solve this problem. They are installed inside classic boxes, in some cases they are built into the rest of the furniture.

Purpose

Drawers, baskets and other structures are used to optimize kitchen space. With the same space occupied, it is possible to fit more things in them than in standard drawers.

These systems are also designed for additional kitchen equipment. It has a lot of free areas where it is impossible to place classic boxes. For example, retractable systems can be placed on the top edge of the place where there is a trash can. The space itself is not occupied there, but nothing can be removed there either.

By analogy with this place for installing sliding systems in the kitchen, there are many others. As a result, the room does not become visually more crowded, however, there are more functional departments in which something can be put. And this is an additional space saving.

In addition to the possibility of storage, retractable structures can carry their own, separate function. For example, in a large bedside table it is possible to build a pull-out table with chairs for children. Or a cutting board inside the countertop.

Drawers are the best option for installation in the kitchen. They allow you to make the most efficient use of free space. As a result, with the same volume occupied, they can fit more things than in classic boxes with shelves. And thanks to the external and species diversity of designs, they can be successfully integrated into the interior of any kitchen.

back to index ↑

Types of sliding systems for the kitchen

There are a lot of variations of sliding systems for the kitchen. This is due to the number of utensils in which it can be installed. However, all of them can be divided into several functional groups that differ in the place of installation and application. Below we will consider the most popular of them: horizontal, vertical, angular and original systems. Each type has its own functional features, as well as a location.

Horizontal

This type of sliding systems for the kitchen is one of the most popular. In appearance, such structures are baskets with a large bottom, which are mounted on special fittings. And on their facade is a classic panel with a handle for a drawer.

Similar designs are most often installed in kitchen cabinets instead of standard shelves.

vertical

Vertical retractable structures are a rarer occurrence in the kitchen. This is due to the fact that there is no place for them in standard furniture. Therefore, they are installed in the unoccupied space.

For example, on a kitchen table, the legs are not attached to the countertop at the edges. Accordingly, the space there is free. Such a place is optimal for embedding vertical retractable systems. The fittings are attached to the sides of the table, and the structure is already installed on them.

This approach allows you to use more kitchen space without adding new elements to the amount of furniture. Ergonomics of vertical sliding systems is very high. After all, they are installed where nothing else can be put, and do not occupy free space.

corner

A popular type of sliding systems for the kitchen are corner. The junction of two walls is the most inconvenient place to install furniture. After all, then it is difficult to get anything out of it. In such situations, such designs are optimal.

They are of the "carousel" type, when, together with the drawer panel, they are pulled out of the wall at an angle. In such a situation, the entire interior space can be made with kitchen utensils, and after that it will become easier to get them.

Side drawers can be distinguished as a separate subspecies of corner systems. In terms of functionality, they are exactly the same as the usual ones. But they differ in appearance. Their front panel is bent at an angle of 90 degrees in the middle, and the handle is attached to both of the resulting faces.

This type of installation requires redoing the internal walls so that the corner system can move normally. But in appearance, it will be very remarkable, because such solutions are rarely found in the kitchen at home.

Original

The original types of sliding systems for the kitchen include all those solutions that do not fall under the classification of horizontal, vertical or corner structures.

These are solid products of certain sizes. Suitable for embedding in a given place. Basically, they perform a function that is not related to the storage of kitchen items. Most often they are an auxiliary item. A striking example of the original type of built-in systems is the cutting board. It is installed in the table, and, if necessary, extends from there.

It cannot be said that some kind of sliding systems for the kitchen. They just don't perform exactly the same functions. And they differ in the place of installation. To create a kitchen that will be fully equipped with these structures, you should use several types or all of them. In this case, the room will turn out to be as ergonomic and modern as possible.

back to index ↑

Unusual solutions

Since pull-out designs are a modern variation of kitchen furniture additions, some models look quite unusual. In some situations, their functional features stand out. For a better understanding of the specifics of sliding systems for the kitchen, unusual variations should be considered.

Matryoshka box

An interesting solution for the kitchen space will be a matryoshka box. According to the name, one of them will be larger, and the second will be inside the first.

Inside an ordinary box in the kitchen, special fittings are installed, on which a retractable structure will then be attached. Its faces should occupy only the lower part of the free space. And the second box will be built into the top. It requires separate hardware to install. And it is with its installation that you should start.

As a result, when the first drawer is pulled out, access to the second one will be opened. In terms of storage capabilities, such a solution will be inferior to one, but large. However, from a stylistic point of view, this idea is very interesting.

Children's table

In a large bedside table in the kitchen, you can build a pull-out children's table with chairs. This is an interesting and practical solution.

In the top drawer in the middle of the bedside table, place the tabletop. And in the two lower, on both sides of the first, install on the seat. The result is a children's table, which can be pushed in, making room for passage.

Thanks to such a sliding system for the kitchen, it will be possible to save a large amount of space on it. And the maintained weight of fittings is from 30 to 50 kg. Therefore, it is absolutely safe for children to sit on retractable chairs, the design will withstand their weight.

back to index ↑

Advantages of sliding systems for the kitchen

Pull-out systems for the kitchen have many advantages compared to classic pull-out designs. You should check them out before buying.

The main advantage has already been named. Thanks to their placement, it is possible to completely occupy the space of the boxes. In particular, their distant parts, which previously could be reached mainly by touch or by getting the rest of their contents.

Another important advantage in addition to practicality will be the appearance of retractable structures. They look stylish and modern. However, they do not immediately catch the eye, since they are initially hidden in kitchen utensils.

It is also worth highlighting their versatility. Pull-out systems for the kitchen exist in many variations that differ in shape and size. Due to this circumstance, they are easily integrated into most suitable furniture.

Thanks to retractable structures, it is possible to additionally equip kitchen utensils. Additionally, take up free space, without compromising the ergonomics of the solution and the convenience of the owners of the house. For example, embed it in the door of the trash can drawer.

The use of sliding systems for the kitchen allows you to most optimally occupy its free space. And such solutions will look stylish. In most cases, these structures will last a long time.

back to index ↑

Flaws

However, such structures also have disadvantages. There are not very many of them and they do not overshadow the benefits. However, you should familiarize yourself with the negative factors of free space organization systems in the kitchen. Thanks to this approach, it will be possible to prepare for them in advance, avoiding possible inconvenience.

Systems cost. The price for retractable structures can rather be attributed to disadvantages. Mesh baskets, as well as other variations, will come out more expensive than classic kitchen solutions.

The need for additional installation. Before installing sliding systems for the kitchen, sites should be prepared for their placement. Special fittings are installed inside the boxes, and structures are already fixed on it.

Dependence on the tools and skills of the master. This shortcoming follows from the second. For the installation of these structures, a number of tools are required, as well as a special person who can competently carry it out.

Care. To ensure that the fittings do not loosen and do not give a roll of structures, it must be monitored. If you do not tighten it in time, then the load on the retractable structures will increase.As a result, this can lead to its breakdown, including irreparable.

In addition to the above disadvantages, there are several more, but already associated with the type of fittings installed in sliding systems for the kitchen. The more expensive it is, the less cons it has. But the high price itself also becomes a disadvantage.

Thus, the shortcomings of retractable structures themselves are not so significant and most often have a local character. And a number of advantages levels them. Therefore, the installation of free space organization systems for the kitchen will bring much more benefits. And the inconvenience will be less than the classic solutions.

The advantages of sliding systems for the kitchen are much greater than the disadvantages. And those are connected, basically, not with inconvenience, but with price and installation. High-quality fittings will last for many years, provide full opening of drawers, while without unnecessary noise. Choosing a retractable design, the owners of the house make using the kitchen much more comfortable.

back to index ↑

Types of fittings

In addition to the appearance and placement, retractable structures differ in the installation method. The boxes in which they are fixed are pre-equipped with special fittings. And the reliability and functionality of the entire structure will depend on it.

Roller guides

At the moment, the mechanism of fittings for roller guides is the simplest. One such guide is attached to the box, and the second - to the sliding system. When installed, they are combined, thereby creating a movable structure.

Roller guides are the most unreliable option. Some of their elements are made of plastic, for this reason they are able to withstand loads of up to 25 kg together with the box. Also, when extended or closed, the roller guides make distinct sounds. They are not aggressive, but such a system will not be silent. Another disadvantage of them is the fact that after installation they cannot be further adjusted. This accessory does not include any additional functionality.

However, their prevalence is due to a number of advantages. In terms of cost, roller guides are very cheap. This fact is due to the simplicity of the design and the absence of additional elements. In addition, it is worth highlighting the fact that roller guides can be mounted anywhere, as long as there is enough free space in it.

Roller guides are suitable as fasteners for light elements of pull-out systems for the kitchen. So that the total load on them does not exceed the permissible weight. In such cases, the design will last for several years, but you should not count on a long term.

Ball guides

Ball guides are a more advanced version of fittings. They have a telescopic opening type. That is, as the structure expands, it increases in length, and when closed, it decreases. Thanks to this solution, the fitting system is one-piece. One of its ends is fixed on the drawer, and the other on the inside of the drawer.

Ball guides provide greater extension of the structure. And they can withstand a weight of up to 30 kg. And they make less noise.

However, this type of fitting costs more than roller. Therefore, the price of a sliding system for a kitchen with ball guides will be higher. But this design will last longer.

Hardware metabox

Metabox fittings are the walls of drawers with mechanical elements. The side faces are made of metal.

On the design itself there is the possibility of three-dimensional adjustment.Fittings such as metabox can withstand a load of up to 30 kg. The ride is smooth and silent. Drawers can be extended to full length or partially.

The price for them is acceptable, a little more expensive than that of ball guides. However, the reliability indicators of such systems are higher.

Cargo systems

Retractable systems of certain dimensions and shapes are produced, which are attached directly to the furniture in the kitchen. They are called cargo systems. That is, these are ready-made structures with fittings. Movable mechanisms in them are placed directly on the elements of drawers.

One of the advantages of such systems is the ease of installation. After all, the fittings are already located on them, it is enough to prepare kitchen furniture for installation. Another thing to consider is reliability. Monolithic structures will last a long time, and are also able to withstand heavy loads.

The main disadvantage of retractable cargo systems is their cost. A prefabricated structure of this type will be much more expensive than pull-out systems for a kitchen with fittings that are installed separately.

back to index ↑

The choice of sliding systems for the kitchen

You should choose retractable designs for the kitchen only after familiarizing yourself with their types and variations of fittings, as well as the advantages and disadvantages.

First of all, you should focus on the appearance. Retractable systems should successfully fit into the interior of the kitchen. It is desirable that their colors either match or be combined with the style of the rest of the furniture.

Do not forget about the fittings of these structures. She needs to be able to handle the load. Roller guides in this regard are the most impractical due to their low reliability. However, the price of drawers with such fittings will be budgetary.

The most expensive solution is the cargo system. After all, this is a one-piece design that is built into the furniture. Differs in the increased reliability and high functionality.

Designs with ball guides and metabox fittings are intermediate options. They have sufficient reliability and are able to withstand a load of up to 30 kg, which is quite enough for kitchen conditions. They have a silent course, and there is also the possibility of adjusting the fittings. At a price, such solutions will come out more expensive than roller guides, but cheaper than solid cargo systems.

The dimensions of the sliding systems for the kitchen are also important. They must fully occupy the niche intended for them. If the design is larger, then it simply does not fit in the appropriate box, and it is not possible to shorten it.

With smaller dimensions, everything is easier. In this case, the pull-out system cannot be fixed on both sides of the drawer if it is built into it. The load on the structure will increase, which will negatively affect the lifespan. As a result, it will become unrepairable.

But the internal structure of the drawer can be modified so that the pull-out structure is securely fastened. But this will take a certain amount of time, and will also require materials, tools and related skills.

However, with dimensions, everything is simpler, because pull-out systems for the kitchen are most often performed in classic sizes, under which standard drawers fall. Therefore, the main emphasis should be placed on the appearance, purchase budget, fittings and reliability. But also take into account the dimensions. With this approach to choice, it will be possible to choose the best option for the kitchen.

back to index ↑

Photo gallery - sliding systems for the kitchen

back to index ↑

Video

---