Do-it-yourself fence for garden beds

In pursuit of a good harvest, few summer residents think about the fact that the garden should look aesthetically pleasing. No, this is not about the evenness and symmetry of the rows of vegetables, I mean the fence for the beds.

This is an extremely rational decision and should not be abandoned. The use of borders is recommended not only on the basis of the fact that they will give the garden a neat and well-groomed appearance. They are much more functional than you think. We will talk about their practical qualities today.

Why do you need a border for the beds

The fact that the beds surrounded by a mini-fence have a more interesting look and become a kind of decoration for the country landscape is undeniable, but this is not the main reason why it is worth protecting them. This decor is indispensable when laying out beds on loose and low-fertile soils. He will help in the arrangement of greenhouses. The presence of a border simplifies the care of seedlings. Any fence in any interpretation, even if a do-it-yourself fence was assembled for the beds:

• will block access to the planted area to creeping pests;
• provide rational watering;
• simplify weeding, feeding process;
• preserve the fertile soil layer;
• keep the landing in the allocated place.

As you can see, there are more than enough reasons to think about installing building envelopes.

back to index ↑

What can you make a fence for beds

An issue that requires close consideration, since there are many materials and solutions. Let's focus on the most common.

So, the border for the beds can be:

• stone;
• wooden;
• metallic;
• plastic;
• brick;
• concrete.

Manufacturers offer fences in a large assortment. Today in stores you can find everything your heart desires, but still many people prefer to build a fence for beds with their own hands, using everything that comes to hand. Firstly, it is cheaper, and secondly, there is a chance to create a unique landscape composition. Something, but our summer residents do not hold fantasies and ingenuity!

Let's start with an introduction to industrial production borders.

plastic fencing

“When choosing a fence for beds made of plastic, especially if you need a structure not only as a decoration of the landscape, look for products of high rigidity and strength”

Such fences are very convenient when it is necessary to arrange beds of non-traditional curvilinear shapes. They are also good at organizing multi-tiered gardens. Plastic models are easy to install.

Installing a border for the beds with your own hands is not difficult. To do this, you do not have to dig grooves or holes. To fix the sections, it is enough just to stick the support pins of the sections into the ground. Fences are not afraid of the sun and moisture. Does not bring them much harm and temperature changes.Plastic borders are easy to rearrange if the need arises.

Curb tapes are especially popular with modern gardeners. Their main advantage is environmental friendliness. The tape is treated with stabilizers, giving it additional resistance to negative natural influences. Fencing for beds of this type is completely harmless to humans and plants.. The plastic border will not be corroded by corrosion, therefore, it will be able to maintain its appearance for many years.

Garden tape allows you to decorate not only the garden area, but also to mark the boundaries of the paths, highlight the flower beds. With its help, raised beds or a cascading garden are equipped. Since the tape border for beds is made of plastic of medium hardness, the fence keeps its shape perfectly and is easy to install. Colored fences in green and brown shades are in the greatest demand.

No less interesting in the landscape of the site are borders of the "Labyrinth" type. These are low fences with a stone-like texture. The successful design solution of the fence allows you to process the areas adjacent to it using a lawn mower. "Labyrinth" perfectly resists the pressure of weeds and grass, not letting them into the fenced area.

Plastic fences "Garden Board" are also considered a good solution. This is an aesthetic and easy-to-assemble type of border for beds, outwardly being an imitation of a board. The model is characterized by increased rigidity of the sections.

Durable plastic is used in arranging a multi-tiered garden and raised plantings. The popularity of the fence for the beds of this series is given by the design specificity, which provides for the possibility of adjusting the size of the sections. They can be extended in any direction.

No less popular type of zoning in the country landscape and garden designer. From its elements, you can quickly assemble a border for beds with your own hands of any configuration and height.

Plastic borders are offered in a variety of colors and shapes. It can have both an unsightly appearance and amaze with its decorative effect. The former are used in cases where it is not planned to draw attention to the fence. The task of such a fence is purely practical: to strengthen the bed and protect it from weeds.

The latter initially have an original design and are covered with all sorts of ornaments, or they are an imitation of a picket fence, forging, masonry. They are distinguished by bright colors. Decorative plastic will become a real decoration of your garden.

When choosing a fence for plastic beds, especially if you need a structure not only as a landscape decoration, look for products of high rigidity and strength. Among the most budget options you will not find them. Cheap designs will not last you longer than a couple of years, and then only if they are removed from the open garden area for the winter.

Border for beds made of metal

When arranging a greenhouse in the garden, creating high beds, it is more rational to resort to the use of metal fences. In the modern interpretation, they have protection in the form of a polymer coating, so they do not suffer from the effects of water. Caution requires their use in sunny areas, because the material is quite hot in the heat and can harm plants in contact with the hedge.

In general, metal fences are durable and decorative. They can be found in various colors.The design is easy to assemble and install, as well as fit into any landscape design solution.

The disadvantages, in addition to high thermal conductivity, include a biting price. The first one can be fought. They try to reduce the heating of the soil by lining the fence on the inside with cardboard. About the cost. Here, a consoling bonus is the durability of the metal border for the beds - having bought it once, you will use it almost all your life.

Wooden fences

Wooden fencing structures belong to the classics of the garden genre. You can decorate a plot in a rustic style by installing a border in the form of a low wattle fence or by assembling it from stumps. Wood cuts are suitable for decorating the beds.

Wattle

If you want to make a fence for the beds with your own hands, then you should not look for the best option. You won't spend a dime on making it. All that is required of you is to cut willow and get hold of pegs. In the absence of a willow vine, you can use the rods at hand, cut from another type of tree. The main requirement for the material: flexibility and sufficient length. The advantage of a wicker fence is the ability to give the fence an arbitrary shape and height.

Chocks in the fence

No less original will look like a border for beds made of chocks. To create it, you will need logs of small diameter. They are sawn according to predetermined markings and vertically installed in pre-prepared grooves dug along the perimeter of the garden. In order for the border to last longer, the parts of the chocks immersed down are dipped in bituminous mastic or wrapped with roofing material.

Boards in the design of beds

The simplest fence for the beds will be boards, simply laid around their perimeter. Do not think that there is little use for such a border. When properly installed, the boards will perfectly prevent soil from washing out of the site. It is difficult to call such an improvisation a durable construction, but such fences are very easy to restore. To give the garden a non-standard look, unusual ways of connecting boards and the use of extraordinary curly fasteners will help.

Decking fences have the highest degree of decorativeness. The only thing that stops gardeners from using it is the high cost of the material. You can present the beds in an interesting design using slats.

Any fence made of wood should be well protected from the effects of moisture and the sun. To do this, it is treated with special compounds, and I open it with varnish or paint.

Brick

A brick fence for beds will be a completely organic solution for their design, especially if the garden is broken against the backdrop of a house built from a similar material. You can expose a brick in various ways. If you've never built a garden border with your own hands, start with the simplest arrangement of digging in a brick upright or laying it out at an angle. More experienced in the construction business can complicate their task and lay out bricks in several rows, fastening the masonry with cement mortar.

The use of this type of material makes it possible to equip raised beds or build barrier fences that protect against the growth of weeds and grass in the garden. The manufacturing technology of the latter is simple. It will not be difficult for you to build such a border for the beds with your own hands.All that needs to be done is to dig in two rows of bricks, in the first of which the stone will be placed on the edge, and in the second it will be laid flat. This creates an impassable obstacle course for the grass.

Using a similar technology, paving stones can be laid out. The disadvantage of brick fences should be considered their stationarity and high price.

Natural stone in the garden beds

A beautiful original and monumental garden fence can be made of natural stone. It will take quite a lot of time to work on its construction. If the task of fencing for the beds is simply to designate their boundaries, then you can not particularly philosophize and lay out the stones in one row, outlining the area around the perimeter. The masonry for beds broken in a vertical plane will look more impressive. To do this, the stone border will need to be made high, and fastening solutions should be used in the work.

If you really competently approach working with stone, then when creating a fence for beds with your own hands, you should take into account that this material is heavy, and, therefore, such a border will need a reliable support so that it does not sag. This means that you will have to think about pouring the foundation. A stone border will be a good solution for vegetable gardens planted in areas with difficult terrain, where, in combination, it may be assigned the role of a retaining wall, as well as when creating beds on a hill.

Pergons

"Pergons do an excellent job as a border for high-rise beds"

No less spectacular approach to the design of the beds.

Pergons are assembled from a metal mesh frame, into the pier of which any available materials are poured:

1. A rock.
2. Wood cut.
3. Pieces of brick.
4. Glass.

Pergons do an excellent job as a border for beds of great height. They make strong retaining walls. The design is environmentally friendly. Plants growing in such a garden are not threatened. Installing a pergola is not a difficult task. Fences do not need a fundamental basis and can be placed on the surface of any relief. Collecting a border for the beds with your own hands will significantly reduce the cost of decorating the garden.

back to index ↑

Fencing for garden beds with your own hands: a creative approach

You can bring the garden to order and make it attractive without investing fabulous sums. As a fence, you can use any material, even at first glance, of little use for this purpose. What to choose? Yes, on everything that remains from repair and construction work or outright garbage. What is meant?

1. Slate and remains of metal tiles.
2. Bottles.
3. Old slopes.
4. Buckets.
5. Barrels.
6. Tableware.

slate beds

A practical and durable border for the beds can be built from the slate remaining after the roof has been covered. Pieces of sheets are simply dug into the ground along the perimeter of the area and supported, for greater stability, with a reinforcing bar.

A durable solution would be a fence assembled from corrugated board. Its sheets are perfectly bent, which allows you to decorate the beds with material that is not of the simplest configuration.

bottle fences

Interesting and long-term fencing options for beds. Taking bottles made of plastic or glass as a building material, you will get a double benefit: get rid of deposits of unnecessary containers and make the appearance of your garden original. To create a harmonious composition, you will need containers of the same displacement.The easiest way is to make a bottle border for the beds with your own hands, digging the elements upside down into the ground. You can beat the decor of the structure by painting the above-ground part of such a fence with multi-colored paints or make bottle masonry in several rows. For strength, in the latter case, a bonding solution is used or the bottles are filled with sand to give them more weight.

Car tires

Perhaps dug in "as is" tires will look luridly in the garden, but figuratively cut tires, with original coloring, can become quite an effective fence for beds with herbs.

household items

There is work in the garden and for leaky pots, understaffed dinner sets, all kinds of pots, jugs and even a chest of drawers. All this can become either a wonderful fence for a garden bed, or its basis. Here, what your imagination will tell you.

Do-it-yourself concrete border for beds

Anything can become a mold for casting protective elements, up to deep disposable plates. To prepare the solution, stock up on M500 cement, sand and water. Dry components are mixed in a ratio of 1:3. After dilution with water, a mixture of sour cream density should be obtained.

When mixing the solution, you can use pigment paint. This is how colored concrete curbs are obtained. If there are no pigments, the fence can be painted in the required color with alkyd paints.

The finished solution is poured into molds and left to harden for at least a day, periodically spraying with water to prevent cracking. The formed tile is removed from the molds and left to grow stronger, somewhere in the barn, for another month. The final stage will be the digging in of the elements of the fence for the beds in a given area.

back to index ↑

Conclusion

As you can see, a creative approach, the use of non-traditional materials, a combination of forms will allow not only to create an exclusive border for the beds, but to place visual accents in the landscape of the site, making the garden area attractive and memorable.

Photo gallery - border for beds

back to index ↑

Video

---