Arrangement of stretch ceilings in the attic

Most owners of private houses use the area rationally, provide full comfort. One of the popular ways to increase living space is the arrangement of the attic, the creation of cozy rooms. Equipped attic increases the degree of comfort, makes the facade more attractive. The design of this zone has its own specifics. The main difficulties may arise in the decoration of the ceiling. There are several options for equipping this part of the premises. If the ceiling height in the attic is decent, you should take a closer look at the tension structures. Their use in the design of such premises provides several advantages.

The specifics of the ceilings in the attic

Difficulties in the design of ceilings in the attic are due to the specific structure. They have a non-standard configuration, include:

• a large number of corners;
• beam elements;
• rafters;
• niches;
• inclined surfaces.

There is no convenient horizontal coverage in such rooms; windows can be located not only on the end vertical walls, but also on the roof slopes. This structure does not allow the use of classic design methods.

In most cases, after the roof is insulated, the owners use lining, plastic panels, and plasterboard sheets for finishing. Beams, rafters can be decorated or remain unchanged, becoming elements of the original interior. These methods provide a decent level of comfort. But if you want to give the interior a stylish, presentable look, a stretch ceiling in the attic will be the best option.

back to index ↑

Advantages of tension systems

The complex broken configuration of the attic ceiling creates certain difficulties in fixing finishing materials. There is a need for high-quality design of a large number of corner joints, often a lot of waste is collected due to the need to draw up many small, non-standard sections. Stretch ceilings in the attic eliminate such problems. One of the significant advantages of the systems is the ability to install on any plane, regardless of its size, location.

These designs also have other important advantages. Tension systems:

• have the ability to retain a large amount of water, protect the interior in case of damage to the roof;
• create additional protection against cold, noise;
• allow you to place in the space between the canvas and the roof all the necessary communications;
• do not create additional load on the load-bearing elements of the house;
• provide unlimited design possibilities.

Textile fabrics in such designs are usually not used. The stretch ceiling in the attic is created using a PVC fabric. One of the advantages of the material is water resistance. The most durable, high-quality roof is not immune from leaks. Polyvinyl chloride will protect furniture, finishes, preserve their integrity. It is able to hold a large mass of water, while maintaining the structure.

The comfort of rooms in the attic largely depends on the reliability of protection from the cold, the noise that precipitation and wind create. Tension systems help to keep warm, reduce the level of sound transmission.

The use of stretch ceilings in the attic makes it possible to qualitatively disguise all communications, make ventilation and air conditioning systems, and electrical wiring invisible. This enhances the attractiveness of the interior. The design of the tension system is lightweight. It practically does not exert a load on the supporting structures of the building.

The fundamental factor in the popularity of stretch ceilings is the extensive possibilities in the implementation of original design projects. With these systems, you can create exclusive interiors in different styles, give the premises maximum attractiveness and comfort. You can see such options in the photo of the ceilings in the attic.

The disadvantages of this design include the high cost. But if the ceilings are mounted by professional specialists using high-quality structures, consumables, they can retain their qualities for up to 30 years. This will fully cover all costs. The downside of the systems is the effect on the parameters of the room. The canvases are located approximately 10 cm from the base. However, if the attic is high, this factor does not matter.

back to index ↑

The main types of ceiling structures

There are practically no restrictions in choosing the design of tension systems. Variability makes such designs the best option for attic spaces. Type, features of systems depends on the height of the ceiling in the attic, the specifics of the interior. They can be:

• single-level;
• two-level;
• multilevel;
• arched;
• domed.

A single-level flat ceiling is equipped in the attic of a small height. In this case, the inclined surfaces are designed as walls. The use of a glossy canvas, a system of built-in spotlights allows you to visually increase the space, give the interior lightness.

Two-level surfaces are used to involve part of the sloped surfaces, ceiling extensions. This option is also used for zoning the room.

The presence of several levels allows you to create a complex interesting design, to give the interior a uniqueness. Such ceilings incorporate sophisticated lighting systems to ensure maximum comfort in any part of the room, providing the right atmosphere.

The arched ceiling is great for decorating high attics. This design visually raises the ceilings and is used in majestic, respectable interiors.

Dome systems are rarely used in the design of attics. But they are the best option for appropriate roofs equipped with a glass roof or a transparent insert.

back to index ↑

Fabric materials in tensile structures

Modern systems of stretch ceilings in the attic can be created with different types of canvases. Beautifully, nobly look canvases from special textiles.Matter is created from natural and synthetic fibers, undergoes a special treatment that provides increased strength, resistance to moisture. For ease of maintenance, the canvases are covered with dirt-repellent agents.

However, textile coverings, even if they are of high quality processing for the attic, are not the best option. In case of damage to roofing materials, water leakage to the ceiling is not ruled out. Textiles will not be able to hold water, it will penetrate the interior elements, it can seep into the rooms in the house.

PVC sheets in stretch ceilings in the attic eliminate this problem. A dense, durable film will not only not let water through, it will hold it in large volumes, while maintaining integrity.

The systems use PVC coatings:

• glossy,
• matte,
• combined.

The high popularity of glossy canvases is due to their ability to visually expand the room, which is important for the attic. In addition, they fit perfectly into modern styles that welcome glitter.

Matte finishes also have certain advantages. These canvases provide the interior with a noble, solid look. It provides the opportunity not to limit yourself in the choice of furniture, decor. The lack of gloss allows you to create a cozy atmosphere. In addition, matt finishes blend harmoniously with many wall finishes.

Glossy and matte canvases can be combined in multi-level, complex designs. This technique provides an opportunity to implement exclusive design ideas, perform successful zoning, and reflect the advantages of the ceilings as much as possible. Competent combination of coatings allows you to perform an ideal visual correction, make the premises higher, wider, provide a feeling of spaciousness.

back to index ↑

Profiles and baguettes in tension structures

In the installation of the frame for the system, profiles from:

• tree,
• aluminum,
• polymers.

But when arranging a stretch ceiling in the attic, it is necessary to take into account the features of these premises. Even with the equipment of a high-quality ventilation system, competent installation of the roof, condensation will appear between the roof and the sheets, and increased air humidity will remain. Therefore, the use of a wooden beam is undesirable. Special impregnations increase resistance to moisture and decay. But even such processing may not ensure safety for several years. In addition, wood has a solid mass, it will create a load on the load-bearing elements.

Aluminum profiles are an excellent option for a frame in these conditions. This metal does not rust even at high humidity, it is light in weight. Polymer elements have similar properties. They are strong enough and durable. In addition, the plastic profile can be given the desired configuration, which is important for creating complex systems.

In addition to profiles, baguettes are used in tension structures. The most popular are polymer elements, which are durable, reliable, easy to install. These products are easily bent, allowing you to design structures with a complex configuration.

Separating baguettes are additionally used in multi-level systems. They not only connect the planes, but also provide good conditions for fixing the backlight. If in creating a stretch ceiling in the attic it is not required to leave a gap between the levels, special gapless systems are used in their connection.

back to index ↑

Choice of shades and decor

The color palette of PVC and textile fabrics for stretch ceilings is extensive. This makes it possible, when choosing coatings, to focus on the features of the interior, personal taste. For the most part, light colors are used for stretch ceilings in the attic. In these rooms there is usually not enough natural light, they need visual expansion of space. Light ceilings solve these problems.

For ceilings in the attic, tones are most often used:

• white;
• cream;
• dairy;
• beige;
• light blue;
• pale pink.

If textile coverings are chosen for the ceiling, they may have a small pattern on a white, pastel background, a simple pattern. Too bright, juicy prints should not be used. They can visually reduce the room. This option can only be used in the case of a high ceiling height in the attic. It is possible to use such materials in a combined system.

One of the significant advantages of PVC film is the ability to apply images using photo printing. The choice of topics is not limited. The ceiling can turn into a sky with floating fluffy clouds, a flower garden, a fabulous tower, etc. This is an excellent technique for creating a unique interior, ensuring full compliance with personal ideas about comfort and coziness.

Tension systems provide the opportunity to combine different materials in the design. You can create interesting coatings, including glossy and matte, PVC and textile canvases. Numerous photos of stretch ceilings in the attic have extraordinary design projects that can be used as a basis.

back to index ↑

Stretch ceilings in design

Tension systems look equally harmonious in classic and modern styles. It is only necessary to carefully choose the type and shade of the canvas, use the possibilities of combining materials.

Matte white canvases look good in classical baroque, empire, french, english styles. They can be supplemented with elegant polyurethane foam moldings. This decor is lightweight, perfectly fixed on any surface. In country styles, Provence, you can use light colors:

• cream,
• beige,
• blue,
• pink,
• light mint.

They will help create coziness, provide an atmosphere of lightness, tenderness. Combinations of matte PVC fabric and textiles look good in such interiors. This technique is also well suited for art deco, modern.

Stretch ceiling in the attic in a modern minimalist style is usually decorated using glossy finishes. Glitter corresponds to the canons of hi-tech, eliminates the excessive severity of minimalism, the roughness of the loft.

Decor using photo printing technology can be applied to various interior styles. The theme of the images is selected in accordance with the nature of the design, finishing materials. Often this decor is used in the design of nurseries, where it is necessary to create the appropriate mood. Ceilings can be decorated with characters from fairy tales and cartoons, magical landscapes.

back to index ↑

The choice of fixtures for ceilings

Modern lighting products allow you to realize any creative idea. Attic rooms need high-quality artificial lighting, natural light penetrates into them in insufficient volume. In the stretch ceiling in the attic can be mounted:

• overhead, hanging chandeliers;
• overhead, built-in spotlights;
• LED strips.

Each manufacturer in the range has ceiling chandeliers designed for installation in a tension system.Their design is designed for the correct location of the mounting platform and diffusers. These models usually use LED light sources that do not pose a risk to coatings. Chandeliers with halogen lamps are equipped with reflectors that direct heat to the floor.

A ceiling light is usually not enough to create comfortable lighting. Point devices are used both as an additional and for the main light. Due to the absence of restrictions in the choice of the location of light sources, you can choose the optimal scheme, create lighting in separate areas. Often these luminaires are used for mounting lighting on transitions in multi-level systems.

The range of LED spotlights is extensive. It is possible to choose lamps with a cold and warm glow, colored elements. Equipping systems with dimmers, remote control allows you to change the intensity, shades of glow, create the right atmosphere at will. LED spotlights installed above the coatings create decorative lighting, provide romance and dreaminess to the atmosphere.

Stretch ceilings in the attic can be equipped with LED strips. These devices can be mounted anywhere. With their help, the interior is provided with maximum attractiveness, originality. In addition, they effectively illuminate areas that do not receive light from the ceiling chandelier.

back to index ↑

Stages of preparation and installation

Installing a stretch ceiling requires a responsible approach. This process includes several preparatory steps:

• laying of heat-insulating, vapor barrier material;
• drawing a mark in the places of placement of profiles;
• fixing the base rails on the rafters;
• drawing marks at the locations of the fixtures;
• fixing baguettes.

The installation of the canvas is carried out in a heated room. The corners of the coating are alternately fixed in the baguette. Provides optimal film tension.

Works on the creation of multi-level structures have a high level of complexity. Qualitatively to cope with such work can only experienced professionals. Without skills, special equipment, you should not take on such designs. There is a high probability of damage to consumables, lack of proper quality of the result.

back to index ↑

Stretch ceiling care features

Despite the complexity of these structures, they are not difficult to care for. Simple manipulations will help maintain cleanliness:

• regular dust removal with a vacuum cleaner;
• periodic wiping the surface with damp textiles or a sponge;
• removal of emerging contaminants using soap, detergents (if it is a polyvinyl chloride film).

Tension structures are maintainable. If, in the event of a roof leak, water has accumulated on the surface of the sheet, this coating can be replaced after it has been removed. In complex ceiling systems with a large number of parts, it is possible to update individual elements if they are accidentally damaged.

These designs can become a worthy decoration of the premises, give them maximum comfort and coziness, if you correctly choose materials, colors, configurations. Consider carefully the photo of the ceilings in the attic. Surely yours is one of them.

back to index ↑

Photo gallery - stretch ceilings in the attic

back to index ↑

Video

 

---